Bent 2010 / Video Mess Tool / Color Me Baddly Breakdown
So, Bent 2010 is over, and as such my arbitrary deadline and excuse for spending time and cheddar on this particular device has been pulled. The above are the final circuits I presented with at the lecture.
The thing on the left is “Color Me Baddly” from the Gerbers below. It’s a color video synth (based on PLLs) which takes a CV in for the color generators (which is peculiar about its input range, to be sure). It also takes a CMOS level input which can invert the color carrier phase by 180 degrees. On the output side it spits standard composite video as well as a CMOS level color carrier (with no sync, blanking, or burst).
The PLL color tracking is pretty good! But not perfect. The PLL keeps lock over a range of a few volts in, and tracks as high as 30+ kHz, which is better than I’d hoped. It took a lot of fudging the loop filter, although the RC calculations weren’t very hard. The invert is a cool input, which originally I just made for the proto because I needed it to to get 360 degrees of color. But in general (not suprisingly) I’m finding that the more inputs you have to things like this the more weird interactions you can get between modulating signals. So I think the invert is here to stay.
The thing on the right is the “Video Mess Tool”. The circuit is different than I originally intended w/r/t the clamping circuits, which had to be made active. The crap you see over in the far right side in the proto area is that new clamp. The clamp ranges changed a little, too. The LT1203 and AD828 and AD8561 are all pretty great ICs and basically do EXACTLY what you’d expect. Even using the opamps in unity gain for the clamps (not recommended) worked without any hitches.
I think this circuit would look a lot cooler with a window comparator — something which muxed many different mess or non mess signals and was smarter about selecting when, and which had a _still_ better series of clamps for restricting signal range. A HSYNC+burst specific monostable following the comparator would also probably not be amiss, although some of the glitchiness would be eliminated. This could be selectable — “sloppy sync” vs “Teutonic Sync” or the like.
The thing in the back is a color synth I made for Christams 2009. It uses varactor diodes instead of a PLL and is its own weird animal. There are pics of that here.
So before finally throwing these guys into the mothballs for who knows what/how long, I made a couple more videos. They showcase some of the more complicated waveforms that can be generated. Neither has any audio involved; both use input from function generators. The above uses the mess tool to mux in a rainbow from the color synth into golf. The lower one is basically two synths being muxed together and inverted all around multiples of 60 Hz, which makes the trippy horizontal band.
Naturally, all this stuff looks better in person; taping an LCD screen with a webcam is not exaclty the height of majesty. And there’s a couple more tech notes on the Narrat1ve youtube channel.
This might be it for this project for awhile, so feel free to write to me or get on the forum if there’s anything else you’d like to know about!
[NOTE: Collin Cunningham of MAKE took a pretty kickass video of my lecture at Bent, and one day I’ll put it up here. Thanks, Collin!]
Xoxo, TB
Tags: Analog, Art Shiz, Bent, Electronics Advice, Hardware, Lectures, Movies, PLLs, Video Synthesis